Receive error out of paper or end of roll but there are still labels on the core. (LX900-LX810)

Article ID: 44811  

Question
Receive error out of paper or end of roll but there are still labels on the core. (LX900-LX810)

Answer

 

Receive error out of paper or end of roll but there are still labels on the core. (LX900-LX810)

1. Labels on the roll may be sticking together.  This may prevent the printer from creating a slack loop under the roll.  Try a new roll of stock. 

2. The loop sensor may need recalibration.  Try the following procedure:

a. Remove the label stock from the printer.
b. Turn off the printer.
c. Press and hold the Feed button as you turn on the printer.
d. Release the feed button after a few seconds.  Resume printing.


Article Details
Views: 2194 Created on: May 24, 2014