(Mac Only) My Bravo (not Bravo II) robotic arm is running into the input and output bins as it moves.
Article ID: 44669

Question

(Mac Only) My Bravo (not Bravo II) robotic arm is running into the input and output bins as it moves.

Answer

(Mac Only) My Bravo (not Bravo II) robotic arm is running into the input and output bins as it moves.

To fix this problem, please contact tech support for a Discribe software upgrade.

This articles applies to MACs only.

related articles

The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)
Discs are printing with poor quality, poor color matching, streaks, banding, or missing colors. (Bravo, Bravo II, Signature Only)
Can I operate my Bravo with its cover open?
How many discs per cartridge can the Bravo/Bravo II print?
Does the Bravo/Bravo II/BravoPro support business card CDs and if so what sizes are supported?
My Bravo (SE, II, XR, XRP, Pro, Xi-Series, 4100 Series) is not picking discs or is dropping discs?
The image is printing off center on my disc every few prints. It will print several centered and then one off center and then go back to centered again. (Bravo)
My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly.
How do I get the most ink from my cartridges, yet maintain good quality? (Signature, Bravo, Bravo II only)
How do I perform the Robotics Self Test for my Bravo series duplicator?

Article Details

Views: 3688	Created on: May 24, 2014 Date updated: Sep 26, 2016
Posted in: Bravo Mac

Poor 1 2 3 4 5 Outstanding