Bravo/Bravo II/BravoPro will not print, there is a flashing ink cartridge (left) button and multiple "Disc Publisher command.." prints queued in the printer queue.
Article ID: 44778

Question

Bravo/Bravo II/BravoPro will not print, there is a flashing ink cartridge (left) button and multiple "Disc Publisher command.." prints queued in the printer queue.

Answer

1. This is most likely due to a corrupted printer driver. Delete and reinstall the driver.
   
   
2. This could also be the result of a USB communication problem caused by an incompatible USB chipset either on the motherboard\onboard USB port, or on the USB 2.0 PCI card port that you have installed in your computer that the Disc Publisher is connected to via the USB cable. The robotics on the Disc Publisher have stalled out as a result of this USB communication problem. The jobs listed in the printer queue are actually robotic arm movement commands that are backed up in the printer queue because the USB port's chipset is not working correctly with the unit.
   
   All robotics commands, burning data, and printer jobs are sent through the USB cable to Bravo. Robotics commands use the printer queue just like your label or print file that you send to be printed on your disc. It is imperative that your USB communication is solid, or you may have problems in any one (or all) of the three areas of communication - burning, printing, robotics. 
   
   
3. Make sure the printer is not paused. Go to Control Panel - Printers. Below the Disc Pulblisher driver it should say paused or ready. If it does not show this information, right click on the printer driver, one of the items on the list will be Pause or Resume printing. If it says Resume printing, your printer is paused, click Resume Printing.

related articles

PrimoDVD Error - No external drives found -or- The Bravo drive does not show up in "My Computer" (BravoPro, II, XR - PC Only)
My Bravo II / BravoPro is burning CDs and DVDs very slowly. What can I do to speed it up?
The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)
My cartridges are empty but the printer driver/ink level monitor says I have some ink left?
The Bravo does not switch bins (left to right or right to left) in kiosk mode. First 50 discs are picked but a picking error occurs after last disc is picked. (BravoPro Xi or 4100 Series)
My image is not printing centered on my discs
Discs are printing with poor quality, poor color matching, streaks, banding, or missing colors. (Bravo, Bravo II, Signature Only)
My Bravo 4100 series Disc Publisher or Auto Printer only prints one disc at a time when I print directly from my design program. (Bravo 4100 Series - Mac Only)
When I turn on (plug in) my Bravo II the cartridges never separate from the arm and I get a flashing Ink (left) light.
Unable to add printer driver in the Printer Setup Utility (Print Center) on MAC OS 10.x -or- Receive message "Driver not Installed" next to Disc Publisher.

Article Details

Views: 8074	Created on: May 24, 2014 Date updated: Dec 03, 2015
Posted in: Bravo I, Bravo 4100 Series, Bravo II or XR, Bravo SE - SE-3, Bravo Pro-XRP-Xi Series

Poor 1 2 3 4 5 Outstanding