The printer prints only part of either every disc or every few discs when burning and printing CDs or DVDs. The partially printed disc is placed in the finished bin and the job continues normally or stops completely. (MAC only)
Article ID: 44890

Question

The printer prints only part of either every disc or every few discs when burning and printing CDs or DVDs. The partially printed disc is placed in the finished bin and the job continues normally or stops completely. (MAC only)

Answer

The printer prints only part of either every disc or every few discs when burning and printing CDs or DVDs. The partially printed disc is placed in the finished bin and the job continues normally or stops completely. (MAC only)

This is a known issue with certain earlier versions of OS 10.4

Upgrade to at least OS 10.4.3 or higher. This is a free upgrade from Macintosh.

Visit www.mac.com to download your update.

Note: This does not affect OS 10.2.x or OS 10.3.x.

related articles

Unable to add printer driver in the Printer Setup Utility (Print Center) on MAC OS 10.x -or- Receive message "Driver not Installed" next to Disc Publisher.
How do I run a Tech Support Report (TSR) in PTPublisher? (Mac or PC)
How do I print my labels all the way to the center or outer edge of the disc?
Can I install CD / DVD / Blu-ray drive(s) in my Disc Publisher?
No Response. Make sure the Disc Publisher is powered on and the USB cable is connected.
Type of job incompatible with type of disc error.
How do I completey remove Discribe Robot for MAC OSX from my computer?
How do I print only to my Disc Publisher from any program on a PC?
The printer is printing over and over on the same disc -or- an Out of Paper message appears after the first disc is printed -or- the cartridge (left) light is flashing rapidly after the disc is printed.
How do I set up a Disc to Disc Copy Job in Primo DVD?

Article Details

Views: 6737	Created on: May 24, 2014 Date updated: May 26, 2016
Posted in: Bravo II or XR, Discribe, Bravo Mac

Poor 1 2 3 4 5 Outstanding