> Knowledge base> Article: "Print Head Failed" error message is displayed in the status monitor. (LX2000)

"Print Head Failed" error message is displayed in the status monitor. (LX2000)

Article ID: 88984 Email Print
Question
"Print Head Failed" error message is displayed in the status monitor. (LX2000)

Answer

Print Head Failed message can be a temporary condition.  Follow these instructions:

  1. Remove the Print Head.
  2. Power off the printer.
  3. Wait 1 minute (This is necessary for all internal capacitors to discharge).
  4. Clean the copper contacts on the printer and the print head with isopropyl alcohol.
  5. Turn on the printer without the print head installed. 
  6. Wait for the printer to start up - approximately 1 minute.
  7. Reinsert the print head.
  8. Close and Open the front cover several times and watch the status monitor between each closing and opening.

If the problem persists, it could be a worn out print head or a problem with the printer. 

A new print head can be purchased on our webstore. Part Number: 053467


related articles

Article Details
Views: 1349 Created on: Mar 10, 2017
Date updated: Feb 08, 2018
Posted in: LX900-LX2000

Poor Outstanding