My Composer Max is not picking discs or is dropping discs. (Calibration Instructions)
Use the instructions below and the three buttons on the front of the ComposerMax to calibrate the picking position of the arm.Note: For best results connect the ComposerMax via the serial cable and open the PrimoDVD program before beginning calibration procedures.
All tray locations, disc bins, and the top two CD drive calibrations.
Two lower CD/DVD drive calibrations.
Place a single disc in the center tray.
Note: Even though this calibration is performed only on one bin it will affect all pick postions.
Calibration of the Printer Stand.
Fine Tune Adjustment of the Printer Tray.