> Knowledge base> Article: After installing an update, PTPublisher Mac does not correctly identify the drives in my robot. The

After installing an update, PTPublisher Mac does not correctly identify the drives in my robot. The robot drops a disc but the drive never opens -or- the arm grinds into the top drive -or- projects do not start after clicking GO. (PTPublisher Mac).

Article ID: 44828 Email Print
Question
After installing an update, PTPublisher Mac does not correctly identify the drives in my robot. The robot drops a disc but the drive never opens -or- the arm grinds into the top drive -or- projects do not start after clicking GO. (PTPublisher Mac).

Answer

 

After installing an update, PTPublisher Mac does not correctly identify the drives in my robot.  The robot drops a disc but the drive never opens -or- the arm grinds into the top drive -or- projects do not start after clicking GO. (PTPublisher Mac).

The drive assignments have been lost after the update. Follow these steps to reassign the drives:

1. Once PTP is open, click on the PTPublisher menu. Choose Preferences.

2. Click on Reset Drive Positions.

3. Close PTPublisher.

4. Open it again. You will be prompted to choose which drives are open.


related articles

Article Details
Views: 2984 Created on: May 24, 2014
Date updated: Mar 17, 2016

Poor Outstanding