> Knowledge base> Category: Signature Z6
Category: Signature Z6
47 Articles
Orange arrow The arm and cartridges slam into the sides of the unit or move in fast jerking motions back and forth. (Bravo/BravoPro/Signature)

8465 views
  The arm and cartridges slam into the sides of the unit or move in fast jerking motions back and forth. The encoder belt may have slipped out of its track in the back of the head carriage unit or it may have become unseated from the posts on either side of the unit. The print head carriage has a ...
Orange arrow Black text is printing blurry or with shadowing.

3836 views
  Black text is printing blurry or with shadowing. There are several possible reasons for this problem. All of them have to do with the driver preferences. Go to Start - Control Panel - Printers and Faxes - right click on the printer (Signature or Bravo) and choose printing preferences. See if y...
Orange arrow The arm and cartridges slam into the sides or move in fast jerking motions back and forth. (Bravo/BravoPro/Signature)

2476 views
  The arm and cartridges slam into the sides or move in fast jerking motions back and forth. The encoder belt may have slipped out of its track in the back of the head carriage unit or may have become unseated from the posts on either side of the unit. The printhead carriage has a sensor behind it...
Orange arrow How do I find the firmware version of my Primera product? (Mac or PC)

2761 views
  How do I find the firmware version of my Primera product?Finding the Firmware Version on a PC. 1. Go to the Start Menu - Choose Printers and Faxes.2. Right Click on the Printer Driver - Choose Printing Preferences.3. Click on Clean/Change Cartridges & Check Ink... as shown below - Choose Prope...
Orange arrow How do I print my labels all the way to the center or outer edge of the disc?

3280 views
  How do I print my labels all the way to the center or outer edge of the disc? To make the printer print closer to the center you need to adjust the Center Size in the driver preferences. Go to the Start Menu - Control Panel - Printers - Right click on the Disc Publisher/CD Color Printer 6 and cho...
Orange arrow What is the difference between RGB and CMYK Color environments? What are PMS (Spot) colors?

3182 views
  What is the difference between RGB and CMYK Color environments? What are PMS (Spot) colors? “CMYK”, “RGB” Each of these acronyms refers to a method of building colors for different environments. RGB The one that you are perhaps most familiar with (or aware of) is RGB. I...
Orange arrow I would like to print a serial number, print date/time, or personalized information on discs - Each disc that is printed will have different information - How do I use SureThing merge fields?

2502 views
  I would like to print a serial number, print date/time, or personalized information on discs - Each disc that is printed will have different information - How do I use SureThing merge fields? With the Insert Field function of the SureThing CD Labeler software you can create serialized discs, autom...
Orange arrow How do I send my product in for repair? How much is it? Where do I send it?

18699 views
  Please contact technical support via phone, email or chat before sending your product in for repair. If they determine that the product needs repair, they will send you a Return Material Authorization (RMA) document which includes the RMA number, packing instructions and the shipping address of our...
Orange arrow My image is not printing centered on my discs

6886 views
  My image is not printing centered on my discs This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...
Orange arrow The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)

7736 views
  The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature) The blinking power light indicates that the unit has a cartridge problem. There could be several reasons for this: 1. Incorrect...
Orange arrow Discs are printing with poor quality, poor color matching, streaks, banding, or missing colors. (Bravo, Bravo II, Signature Only)

5594 views
  Bravo or Signature Print Quality Problems This could be caused by a number of things, but usually is related to an ink nozzle not firing properly because it is clogged with dried ink. There are several things to try, one of which almost always solves the problem: 1. Cartridge. Try a new cartridg...
Orange arrow The ink in the color cartridge is mixing or the first few passes of printing are lighter than the rest. (Cleaning the Maintenance Station)

3218 views
  The ink in the color cartridge is mixing or the first few passes of printing are lighter than the rest. (Cleaning the Maintenance Station) Cleaning the maintenance station prevents the color ink cartridge from mixing or the first few printing passes from being lighter than the rest of the label...
Orange arrow Error: Device driver software was not successfully installed -or- Your printer failed to install. (Windows XP - Any Printer)

14118 views
  Error: Device driver software was not successfully installed -or- Your printer failed to install. (Windows XP - Any Printer)1. Power on the printer using the power button. This forces the PC to re-recognize the device. (If starting at this step, simply connect USB and power to the printer.)2. Withi...
Orange arrow The picture or graphic printed on my label is blurry, pixilated or jagged. (Also applies to images or graphics imported into SureThing or NiceLabel)

4466 views
  The picture or graphic printed on my label is blurry, pixilated or jagged. (Also applies to images or graphics imported into SureThing or NiceLabel) The picture or graphic probably does not have a high enough resolution (DPI). Even though a picture or graphic may look fine on the computer screen, ...
Orange arrow My Primera Printer is not printing - The printed file appears in the print queue and then disappears after a few moments. (PC Only)

6206 views
  My Primera Printer is not printing - The printed file appears in the print queue and then disappears after a few moments (PC Only). Only try the procedure below if you are getting the exact symptom described above. Otherwise consult the related articles at the bottom of this article. A. Install ...

Page: 1 of 4