>
Knowledge base
>
Category: Bravo XRn
Search
All these words:
Exact phrase:
Any of these words:
-- All Products --
Trio
IP60
LX900-LX910-LX2000
LX400-LX500
LX800-LX810
AP360-AP362-AP550
CX1200-FX1200-CX1000-FX1000
Bravo SE - SE-3
Bravo 4100 Series
Bravo Mac
Bravo II or XR
Bravo Pro-XRP-Xi Series
PTBurn SDK
PTPublisher for Mac
PTPublisher for PC
Slide-Cassette Printer
SureThing
Tutorials
- PrimoDVD
- ADL-MAX
- Signature IV
- PTRip
- Optivault-Retrospect
- Signature Z1
- Bravo I
- Accent Laminator
- ComposerMAX
- Bravo XRn
- Signature Z6
- Inscripta
- Discribe
- ComposerPro or XL
- DUP-07
Signature Pro
advanced search
Support center
Knowledge base
Support links
Category View
KB Home
Tools
Share
Category: Bravo XRn
22 Articles
The arm and cartridges slam into the sides or move in fast jerking motions back and forth. (Bravo/BravoPro/Signature)
7104 views
The arm and cartridges slam into the sides or move in fast jerking motions back and forth. The encoder belt may have slipped out of its track in the back of the head carriage unit or may have become unseated from the posts on either side of the unit. The printhead carriage has a sensor behind it...
Posted in:
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
Signature IV
,
Signature Z6
,
Signature Pro
,
Bravo Mac
What is the size capacity of my DVD, Dual Layer DVD or Blu-ray disc?
22486 views
DVD and Blu-ray manufacturers state capacity in decimal form. However, most computers read capacity in binary. The following table translates stated decimal capacity into actual binary capacity. Single layer capacity Dual/Double layer capacity Stated Capacity (GB) PTPublisher Capa...
Posted in:
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
ComposerMAX
,
ComposerPro or XL
,
Discribe
,
PrimoDVD
How do I prepare my unit for shipping to Primera for repair or exchange?
13600 views
How do I prepare my unit for shipping to Primera for repair or exchange? The instructions below should be followed for each product before boxing. It is best to use the original box and foam/cardboard supports. If you do not have the box, package the product in a box large enough to leave space ...
Posted in:
LX900-LX910-LX2000
,
AP360-AP362-AP550
,
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
LX400-LX500
,
LX800-LX810
How do I send my product in for repair? How much is it? Where do I send it?
33853 views
Please contact technical support via phone, email or chat before sending your product in for repair. If they determine that the product needs repair, they will send you a Return Material Authorization (RMA) document which includes the RMA number, packing instructions and the shipping address of our...
Posted in:
LX900-LX910-LX2000
,
ADL-MAX
,
Accent Laminator
,
AP360-AP362-AP550
,
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
Why does lowering burn speed produce fewer errors and better quality discs?
7532 views
Why does lowering burn speed produce fewer errors and better quality discs? Below is an example of an actual test performed to show the advantage of lowering the burn speed. Test 1 - A fifty disc burn at 52x with 700 MB of data produced 3 errors out of fifty. (Average Time per disc 3:18)* ...
Posted in:
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
ComposerMAX
,
ComposerPro or XL
,
Discribe
,
PrimoDVD
The arm and cartridges slam into the sides of the unit or move in fast jerking motions back and forth. (Bravo/BravoPro/Signature)
18900 views
The arm and cartridges slam into the sides of the unit or move in fast jerking motions back and forth. The encoder belt may have slipped out of its track in the back of the head carriage unit or it may have become unseated from the posts on either side of the unit. The print head carriage has a ...
Posted in:
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
Signature IV
,
Signature Z6
,
Signature Pro
,
Bravo Mac
A print job is stuck in the printer queue. How do I delete it? (Any Printer).
19123 views
A print job is stuck in the printer queue (Any Printer). Follow these steps. Stop when the job is deleted. On a PC: Method A - Delete Jobs from Print Queue. 1. Open the print queue by clicking on the printer icon in your system tray (lower right corner) or go to Devices and Printers and double ...
Posted in:
LX900-LX910-LX2000
,
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
LX400-LX500
,
LX800-LX810
Discs are rejected with burn or recording engine errors. I receive software error 101 or burned discs are rejected down the center chute (PTPublisher).
16631 views
Before troubleshooting a burning problem consider the following questions: When does the burn failure occur? The PTPublisher software can reject the disc as bad at any time during a burn. It is often important to determine when the reject occurs. If it occurs immediately at the beginning of a bu...
Posted in:
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
PrimoDVD
,
PTPublisher for Mac
,
PTPublisher for PC
,
Bravo Mac
The picture or graphic printed on my label is blurry, pixilated or jagged. (Also applies to images or graphics imported into SureThing or NiceLabel)
12112 views
The picture or graphic printed on my label is blurry, pixilated or jagged. (Also applies to images or graphics imported into SureThing or NiceLabel) The picture or graphic probably does not have a high enough resolution (DPI). Even though a picture or graphic may look fine on the computer screen, ...
Posted in:
LX900-LX910-LX2000
,
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
CX1200-FX1200-CX1000-FX1000
,
LX400-LX500
,
LX800-LX810
Can I refill my Primera Ink Cartridges?
9133 views
Primera does NOT support the refilling of its ink cartridges. Refilling the ink cartridges can cause them to leak, thus clogging or even damaging the print head. Also, since refill ink is not formulated specifically for the printer or the Primera media, the print quality and water resistance will ...
Posted in:
LX900-LX910-LX2000
,
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
CX1200-FX1200-CX1000-FX1000
,
LX400-LX500
,
LX800-LX810
Color matching is off. Colors are not printing the same as they appear on screen or do not match PMS colors. (All Products)
14304 views
Color matching is off. Colors are not printing the same as they appear on screen or do not match PMS colors. Inkjet printing on label stock or discs can not be matched to PMS colors. PMS colors are derived from specific paints that are mixed for that specific color. The paint is printed on the pap...
Posted in:
LX900-LX910-LX2000
,
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
LX400-LX500
,
LX800-LX810
,
Bravo Mac
PTPublisher burns the disc but will not print. It burns the disc, but stops after it puts the disc in the print tray. (PC)
9814 views
PTPublisher burns the disc but will not print. It burns the disc, but stops after it puts the disc in the print tray. (PC) There are several things to check: 1. Paused Printer. Make sure the printer is not paused. Go to Control Panel - Printers. Below the Disc Publisher printer driver i...
Posted in:
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
PTPublisher for PC
,
SureThing
When recording a Data Project, what is the maximum filename length?
6516 views
CD/DVD: Microsoft Joliet - Up to 106 characters in filename length CD/DVD: UDF - Up to 255 characters in filename length CD/DVD: UDF with Joliet Bridge - Up to 106 characters in filename length* A bridge allows for more versatility and a higher read percentage but it does reduce file name length...
Posted in:
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
PrimoDVD
,
PTBurn SDK
,
PTPublisher for PC
Audio CDs created with the burner in the unit have static, crackling or popping in the background.
6157 views
Audio CDs created with the burner in the unit have static, crackling or popping in the background. There are several reasons for this. Burn Speed. For CDs created via the audio CD job type in Primo(PC) or Discribe(MAC) we recommend burning at a speed no faster than 4x. This is due to the format o...
Posted in:
Bravo I
,
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
ComposerMAX
,
ComposerPro or XL
,
Discribe
,
PrimoDVD
How do I perform the Robotics Self Test for my Bravo series duplicator?
8193 views
How do I perform the Robotics Self Test for my Bravo series duplicator? To ensure that everything is working properly, a Self-Test feature is built into your Bravo. In this mode, the Robotic Disc Transporter will go through the motions of picking and placing a disc to ensure proper working ord...
Posted in:
Bravo 4100 Series
,
Bravo II or XR
,
Bravo SE - SE-3
,
Bravo XRn
,
Bravo Pro-XRP-Xi Series
,
Bravo Mac
Page: 1 of 2
Live Chat Support Software